C10

The C10 compressive force transducer offers outstanding precision and robustness and has multiple uses focusing on applications in test benches, material testing machines, and challenging tasks in production. High output signal.

NEW: Now available with integrated digital amplfier with IO-Link output. Configure your C10 here

C10

expand_more

chevron_left

chevron_right

C10 Compressive Force Sensor with Capacities from 2.5 kN to 1 MN

C10 sensors are radially symmetrical force transducers for compressive forces. The output signal is higher than with other load cells (up to more than 4 mV/V) so that the resolution and the noise /signal ratio of your measurement chain is improved. The C10 series is a benchmark in accuracy, made from rust-free materials, and various configuration options are available for current market prices.

HBM accuracy class: 0.02... 0.05
Capacities: 2.5 kN to 1 MN
Output signal: mV/V (passive Wheatstone bridge) and IO-Link

New: With the new option "VAIO" the C10 comes along with an integrated digital amplifier. Your advantages:

Greater precision: Linearity error 0,005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TCZero: 0.006 % /10K

Improved reliability: The Sensor health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur

More information: Temperature measurement, statistical information

Lower costs, easy setup: The C10 comes along as adjusted sensor. When connected to an IO-Link master you will get immediately correct readings in Newtons. Low cabling costs.

Standard instrument features: Limit switches, peak detection, digital output, Filter

Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master

Please have a look at the K-C10 model. Beside many other option you can find order informaton for the IO-Link version as well.

Advantages of all C10:

Improved precision:

TC0 of only 75 ppm/10K, with digital output just 60 ppm/ 10K
Minimal non-linearity, small hysteresis and excellent repeatability (0.025%)
High output signal of greater than 4 mV/V (from 25 kN capacity). Also available: Integrated amplifier

Economical: Wider measurement range means the same accuracy with fewer sensors - and fewer rejects in production. Even improved with IO-Link option.

Adaptable usage

Made of rust-free material
IP68 degree of protection (with cable option)
Not affected by lateral force and eccentric load application
Vibration resistant
EMC approved

Reliable under harsh environmental conditions, even with electromagnetic fields.

Flexible configuration

Flexible configuration options
Over 10,000 combinations available at short delivery times
Different connector and cable options, TEDS, double-bridge versions available, etc.
Accessories available separately: thrust pieces, connection cables, calibration services
Available with integrated digital amplifier.

Sensors can be matched to the measurement task; plug and play solutions save time and reduce likelihood of installation errors. With integrated IO-Link option even more economical and precise.

Filter

Maximum capacity (nominal load) keyboard_arrow_down
Maximum capacity (nominal load) keyboard_arrow_down
HBK Accuracy class keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Diameter (without cable or plug) keyboard_arrow_down
Diameter (without cable or plug) keyboard_arrow_down

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)	Direction	Strain gauge / piezo	Calibration	Output signal	HBK Accuracy class	Degree of protection	Mechanical adaptation	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)	Load cell design
1-C10/1MN	1 MN	225 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.05	IP67	Spherical load introduction	84.7 mm	3.33 in	279 mm	10.98423 in	-
1-C10/2.5KN	2.5 kN	562 lbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/5KN	5 kN	1.124 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/25KN	25 kN	5.62 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.03	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/50KN	50 kN	11.24 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/100KN	100 kN	22.5 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	47.5 mm	1.87 in	153.9 mm	6.059043 in	-
1-C10/250KN	250 kN	56.2 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	47.5 mm	1.87 in	153.9 mm	6.059043 in	-
1-C10/500KN	500 kN	112 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	65.2 mm	2.57 in	203.2 mm	7.999984 in	-
K-C10	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN	562 lbf, 1.124 lbf, 2.2481 lbf, 5.62 lbf, 11.24 lbf, 22.481 lbf, 56.202 lbf, 112.404 lbf, 224.809 lbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02, 0.03, 0.04, 0.05	IP67	Spherical load introduction	35.7 in, 47.5 in, 65.2 in, 84.7 in	1.41 in, 1.87 in, 2.57 in, 3.33 in	104.8 mm, 153.9 mm, 203.2 mm, 279 mm	6.059043 in, 4.125976 in, 10.98423 in, 7.999984 in	-
dummyOrderEntryProduct

C10 - Data Sheet	Data Sheets	English
C10 - Quick Start Guide	Quick Start Guide	English, Italian, French, Chinese, German
C10 - Mounting Instructions	Mounting Instructions	English, Italian, French, German

Sales documents

Reliable force measurement - Brochure

Brochure

English

Certificates and Approvals

U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity

Declaration of Conformity

English

C10
Maximum capacity (nominal load)	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN
Maximum capacity (nominal load)	562 lbf, 1.124 lbf, 2.2481 lbf, 5.62 lbf, 11.24 lbf, 22.481 lbf, 56.202 lbf, 112.404 lbf, 224.809 lbf, 1.124 klbf, 5.62 klbf, 11.24 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf
Direction	Compression
Strain gauge / piezo	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), IO-Link
HBK Accuracy class	0.02, 0.03, 0.04, 0.05
Degree of protection	IP67
Mechanical adaptation	Spherical load introduction
Height (without accessories)	35.7 in, 47.5 in, 65.2 in, 84.7 in, 35.7 mm, 47.5 mm, 65.2 mm, 84.7 mm
Height (without accessories)	1.41 in, 1.87 in, 2.57 in, 3.33 in
Diameter (without cable or plug)	104.8 mm, 153.9 mm, 203.2 mm, 279 mm
Diameter (without cable or plug)	6.059043 in, 4.125976 in, 10.98423 in, 7.999984 in

List of accessories available for all variants of this family

Product Code	Description
1-EDO3/100KN	Thrust piece to ISO 376 for C10/C15
1-EDO3/1MN	Thrust Piece acc. to ISO 376 for C10/C15
1-KAB158-3	Connection cable, thread - free ends
1-EDO3/500KN	Thrust Piece to ISO 376 for C10/C15
K-CAB-F	Cable, configurable f. force transducers
1-KAB157-3	Connection cable, bayonet - free ends
1-EDO3/50KN	Thrust Piece to ISO 376 for C10/C15

What is Lorem Ipsum?

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

Main Menu

Main Menu

Main Menu

Main Menu

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

C10

C10 Compressive Force Sensor with Capacities from 2.5 kN to 1 MN

New: With the new option "VAIO" the C10 comes along with an integrated digital amplifier. Your advantages:

Advantages of all C10:

Filter

What is Lorem Ipsum?

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com