P2VA1/500BAR

Pressure transducer P2VA1/500bar

Pressure transmitter P2VA1,
Measuring range: 0...500 bar,
Measuring system: measurement by
strain gauge 350 Ohm,
Accuracy class: 0.3,
Output Signal: 0,5...10V,
Supply voltage: 24 V (15...30 V),
Cut off frequency: 4.5 kHz (-3dB),
connector: plug M12x1 / 5-pole,
Monolithic measuring body,
Transmitter made by 1.4542,
Sealing made by 1.4301,
Degree of protection: IP67,
TEDS integrated,
A 5 m long PUR connection cable (1-KAB166-5) is included in the scope of
supply

expand_more

chevron_left

Overview
Documents
Downloads
Specification
Accessories

chevron_right

P2VA1 and P2VA2 Pressure Transmitters: Measurement with an Accuracy Class of 0.3

The P2VA1 and P2VA2 pressure transmitters can measure pressure that amounts to 5,000 bar with an accuracy class of 0.3. They are equipped with HBK’s high-grade strain-gauge technology and are ideally suited for dynamic and static measurement tasks in the industry; for instance, in water-jet cutting, high-pressure forming, or isostatic presses. The P2VA1 and P2VA2 come with an integrated amplifier. Thus, these can be directly utilized for industrial process control, without the requirement of any additional measurement electronics. Owing to their corrosion-proof, robust, one-piece stainless-steel measuring body, the pressure transmitters have permanent resistance against chemically demanding environments; for instance, in test-bench applications of the petrochemical industry.

The pressure transmitters facilitate immediate use, as they have an automatic measuring point identification enabled by TEDS. Two selectable signal outputs, volt with the P2VA1 or milliampere with the P2VA2, enable easy integration with the existing measurement systems.

A special feature offered by the transmitters is “live zero”: 0 bar pressure is presented as 0.5 V or 4 mA; if a smaller value is measured in the control system, an error is detected, and the system can be shut down safely.

The P2VA1 and P2VA2 have eight nominal (rated) pressure options, which makes them the first choice for many industrial applications.

Versatile use

Accurate measurement, attributed to the accuracy class of 0.3
Equipped with a high-grade, low-noise amplifier
Suitable for static and dynamic measurements due to the use of strain-gauge technology
Available with an output in volt or milliampere

Ideal for demanding measurement tasks from the proven HBK strain-gauge technology

Safe for use

Robust, monolithic stainless-steel measuring body
Corrosion-resistant, even in a chemical-exposed and humid environment
Integrated function test through “live zero”
Withstands loads of up to 1.5 times its nominal (rated) pressure
Resistant to permanent humidity and dirt owing to its IP67 degree of protection
Shock-proof for applications with vibrations (in compliance with DIN IEC68)

Reliable and resistant thanks to its stainless stainless-steel measuring body and convenient function test

Easy integration

Five nominal (rated) pressure ranges are available: 500 bar, 1,000 bar, 2,000 bar, 3,000 bar, 5,000 bar
Ready for immediate use, with TEDS automatic sensor identification
Standardized 5-pin M12 plug and connection thread with G1/4 external thread or M16 x 1.5 internal thread (from 3,000 bar upwards)
Available with 5-m or 20-m connection cable and many other accessories

Ready for use quickly owing to the integrated amplifier and TEDS technology

P2VA1, P2VA2 - Data Sheet	Data Sheets	English
P2V - Mounting Instructions	Mounting Instructions	English, French, German

Certificates and Approvals

P2VA1/P2VA2 - EU Declaration of Conformity

Declaration of Conformity

English

Key Attributes: Pressure Transducers
Application	Industrial
Measurement range	500 bar
Measurement range	7252 psi
Accuracy class	0.3
Electrical connection	Plug
Output signal	Passive [mV/V], Current (4-20mA)
Measurement principle	Absolute pressure
Length	70 mm
Length	2.76 in
Diameter	30 mm
Diameter	1.18 in
Minimum Temperature	-20 °C
Maximum Temperature	85 °C
Minimum Temperature	-4 °F
Maximum Temperature	185 °F
Degree of protection	IP67

Product Code	Description
2-9278.0371	Packet, cone seal set P2V/100-2000bar
1-ADAPT.G1/4-M20	Connection adapter for P2V G1/4 to M20
1-KAB166-20	Connection cable for P2V, PUR, 20m
1-ADAPT.G1/4-G1/2	Connection adapter for P2V G1/4 to G1/2

Product Option Page

The C10 compressive force transducer offers outstanding precision and robustness and has multiple uses focusing on applications in test benches, material testing machines, and challenging tasks in production. High output signal.

NEW: Now available with integrated digital amplfier with IO-Link output. Configure your C10 here

C10 Compressive Force Sensor with Capacities from 2.5 kN to 1 MN

C10 sensors are radially symmetrical force transducers for compressive forces. The output signal is higher than with other load cells (up to more than 4 mV/V) so that the resolution and the noise /signal ratio of your measurement chain is improved. The C10 series is a benchmark in accuracy, made from rust-free materials, and various configuration options are available for current market prices.

HBM accuracy class: 0.02... 0.05
Capacities: 2.5 kN to 1 MN
Output signal: mV/V (passive Wheatstone bridge) and IO-Link

New: With the new option "VAIO" the C10 comes along with an integrated digital amplifier. Your advantages:

Greater precision: Linearity error 0,005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TCZero: 0.006 % /10K

Improved reliability: The Sensor health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur

More information: Temperature measurement, statistical information

Lower costs, easy setup: The C10 comes along as adjusted sensor. When connected to an IO-Link master you will get immediately correct readings in Newtons. Low cabling costs.

Standard instrument features: Limit switches, peak detection, digital output, Filter

Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master

Please have a look at the K-C10 model. Beside many other option you can find order informaton for the IO-Link version as well.

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)	Direction	Strain gauge / piezo	Calibration	Output signal	HBK Accuracy class	Degree of protection	Mechanical adaptation	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)	Load cell design
1-C10/1MN	1 MN	225 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.05	IP67	Spherical load introduction	84.7 mm	3.33 in	279 mm	10.98423 in	-
1-C10/2.5KN	2.5 kN	562 lbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/5KN	5 kN	1.124 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/25KN	25 kN	5.62 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.03	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/50KN	50 kN	11.24 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	35.7 mm	1.41 in	104.8 mm	4.125976 in	-
1-C10/100KN	100 kN	22.5 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	47.5 mm	1.87 in	153.9 mm	6.059043 in	-
1-C10/250KN	250 kN	56.2 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	47.5 mm	1.87 in	153.9 mm	6.059043 in	-
1-C10/500KN	500 kN	112 klbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.04	IP67	Spherical load introduction	65.2 mm	2.57 in	203.2 mm	7.999984 in	-
K-C10	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN	562 lbf, 1.124 lbf, 2.2481 lbf, 5.62 lbf, 11.24 lbf, 22.481 lbf, 56.202 lbf, 112.404 lbf, 224.809 lbf	Compression	Strain Gauge	Calibrated	mV/V (passive strain gauge)	0.02, 0.03, 0.04, 0.05	IP67	Spherical load introduction	35.7 in, 47.5 in, 65.2 in, 84.7 in	1.41 in, 1.87 in, 2.57 in, 3.33 in	104.8 mm, 153.9 mm, 203.2 mm, 279 mm	6.059043 in, 4.125976 in, 10.98423 in, 7.999984 in	-
dummyOrderEntryProduct