WA-T

Displacement transducers of the WA-T series in the probe version feature impressively reliable and highly accurate measurement results. They have already been tried and tested a thousand times over in the most diverse applications.

WA-T

expand_more

chevron_left

chevron_right

WA-T: Inductive Displacement Measurements in a Compact Design; Nominal (Rated) Measuring Range up to 100 mm

The technologically sophisticated and proven displacement transducers of the WA-T series in the probe version feature an incredibly short design (in comparison to the measuring range). The compact dimensions of the sensor have been possible through the utilization of an active quarter bridge circuit based on the differential inductor principle. The bridge is also directly integrated in the sensor to create a full bridge circuit for easy connection of the WA-T transducer to the measuring amplifier.

Insensitive to dirt, the WA-T displacement transducers feature rugged mechanics and exhibit significantly stable temperature behavior. This means they can be applied in almost every area of the industry and generate outstanding results in displacement measurements.

Stable and rugged

Ruggedized mechanical construction
Insensitive to dirt
Equipment protection level up to IP67 depending on the version
High resistance to shock and vibrations per DIN EN 60068
Typical service life is more than 10,000,000 cycles
The carrier frequency is 4.8 kHz, which is insensitive to electrical interference.

Reliable and worry-free measurements over a long period, without any appreciable wear and tear

Numerous variants

Available in 5 different measurement ranges, 0…2 mm, 0…10 mm, 0…20 mm, 0…50 mm, 0…100 mm
6 different cable/plug types configurable on the transducer
There is Also also an choice option of between free ends or 3 different plugs for connecting to the amplifier or electronics
A high-temperature version (up to +150° C) and a low-temperature version (to -–40° C) are also available
0.1 % or 0.2 % non-linearity (can be selected for many types)
The electronics can be optionally integrated for output signal in V instead of mV/V
Altogether, there are more than 5000 different combinations that are possible.

One displacement transducer, ideally adapted to your individual application due to numerous options and configurations.

Filter

Measurement range keyboard_arrow_down
Measurement range keyboard_arrow_down
Mechanical connection keyboard_arrow_down
Length keyboard_arrow_down
Length keyboard_arrow_down

Code	Measurement range	Measurement range	Mechanical connection	Length	Length
1-WA/2MM-T	2 mm	0.079 in	Probe	159 mm	6.26 in
1-WA/10MM-T	10 mm	0.394 in	Probe	159 mm	6.26 in
1-WA/20MM-T	20 mm	0.787 in	Probe	209 mm	8.23 in
1-WA/50MM-T	50 mm	1.97 in	Probe	299 mm	11.8 in
1-WA/100MM-T	100 mm	3.94 in	Probe	491.6 mm	194 in
K-WA	2 mm, 10 mm, 20 mm, 50 mm, 100 mm, 200 mm, 300 mm, 500 mm	0.079 in, 0.394 in, 0.787 in, 1.97 in, 3.94 in, 7.87 in, 11.8 in, 19.7 in	Loose plunger	124 mm, 154 mm, 159 mm, 209 mm, 214 mm, 299 mm, 330.6 mm, 491.6 mm, 530.6 mm, 730.6 mm, 1130.8 mm	4.88 in, 6.06 in, 6.26 in, 8.23 in, 8.43 in, 11.8 in, 130 in, 194 in, 209 in, 288 in, 445 in

WA - Data Sheet	Data Sheets	English
WA - Mounting Instructions	Mounting Instructions	English, Italian, French, German

Certificates and Approvals

WA - EU Declaration of Conformity

Declaration of Conformity

English

WA-T
Type/technology	Inductive
Application	Multi purpose
Measurement range	10 mm, 50 mm, 100 mm, 2 mm, 20 mm, 200 mm, 300 mm, 500 mm
Measurement range	0.394 in, 1.97 in, 3.94 in, 0.079 in, 0.787 in, 7.87 in, 11.8 in, 19.7 in
Degree of protection	IP67
Output signal	Passive, Voltage (+/- 10V)
Mechanical connection	Probe, Loose plunger
Linearity deviation	0.2 %
Shaft diameter	12 mm
Shaft diameter	0.472 in
Length	159 mm, 299 mm, 491.6 mm, 209 mm, 124 mm, 154 mm, 214 mm, 330.6 mm, 530.6 mm, 730.6 mm, 1130.8 mm
Length	6.26 in, 11.8 in, 194 in, 8.23 in, 4.88 in, 6.06 in, 8.43 in, 130 in, 209 in, 288 in, 445 in

List of accessories available for all variants of this family

Product Code	Description
1-WS/ZB12	Displacement transducer WA mounting kit

Main Menu

Main Menu

Main Menu

Main Menu

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Operating Deflection Shapes (ODS) Analysis

Mobility Testing

WA-T

Stable and rugged

Numerous variants

Filter

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com