MX471C

QuantumX CAN FD module (4)

4-channel CAN FD module of the QuantumX family;
Supports ISO CAN FD, CAN 2.0 A/B;
Read CAN (receive):
- Decode 128 signals in real time;
- Read all bus signals (raw) and decode them on the PC;
- Decode CCP, XCP-on-CAN signals (requires CANape);
CAN gateway:
- Write up to 200 analog signals to CAN FD (transmit):
- Connection of MX modules via FireWire;
Ethernet gateway:
- Send signals from all connected MX modules to the PC;
- 2 x Ethernet 100/1000/1000 (PTPv2, RJ45);
General:
- Configurable bit rate, switchable internal termination;
- Electrically isolated channels;
- Socket: D-Sub 9-pin (male);
- Voltage supply: 10...30 V DC, max. 6 W.

expand_more

chevron_left

Overview
Documents
Downloads
Specification
Accessories

chevron_right

Quantumx MX471C - Can FD Under Control for Mobile and Bench Testing

The QuantumX CAN FD bus module MX471C module allows you a simultaneous integration of up to four CAN or CAN FD networks into the QuantumX data acquisition system and can be expanded to as many modules as needed.

This module is able to receive any signal from CAN FD, CAN, CCP, xCP-on-CAN/FD, J1939, ISOBUS or CANopen and combined with analog measurement input modules, plus the Data Recorder is ideally suited as CAN FD recorder for your mobile vehicle test or fleet monitoring task. For this all signals can be acquired as raw signal stream and decoded in PC or recorder software. All the acquired signals can also be decoded in real-time and transferred to analog voltage output (MX878B) or for instance to an Ethernet based fieldbus (CX27C) for bench integration.

The module’s powerful CAN gateway mode allows you up to transmit up to 200 analog inputs signals to your automation system and thus an easy way integrating new equipment in your existing bench test or in any mobile recorder or test equipment. For this all signals can be encoded in real-time which allows lowest latencies < 1 ms.

MX471C also operates as Ethernet gateway. So any signal from directly connected MX modules can be transferred to Ethernet and to a PC or recorder.

Additionally, messages can be split up, as required, and reassembled, for instance, to setting up a CAN-2-CAN gateway is possible.

Powerful

Time stamped signal acquisition on up to four CAN FD busses, fully isolated
Single device receiving signals (raw or on-board real-time decoding), analog signal transfer and Ethernet gateway in parallel
High data transfer rates of up to 4 MBit/s in CAN FD mode

Receive and transmit with high data throughput

High connectivity

Receiving many different protocols such as CAN FD, CAN 2.0 A/B, CCP, xCP-on-CAN, J1939, ISOBUS, CANopen
Transmitting any analog data from connected QuantumX modules to CAN FD or CAN
Transmitting any analog data from connected QuantumX modules to Ethernet and to PC or data recorder

Flexible integration into various networks owing to many supported protocols

Universal use

Four individually configurable, electrically isolated channels
Ideal for measurements with multiple CAN bus systems (individually configurable channels)
Packet generation and transmission of analog inputs via CAN messages (Gateway Mode)
Extensive range of accessories: Cables, connectors, drivers, and a software package

Synchronous recording of bus signals, completely synchronous with the analog sensor data provided by other MX modules, owing to optimal integration into the QuantumX family

QuantumX MX471C - Data Sheet

Data Sheets

English

Sales documents

QuantumX - Brochure

Brochure

English

Certificates and Approvals

QuantumX - EU Declaration of Conformity

Declaration of Conformity

English

MX471C-R - CAD

CAD Step Files

Key attributes: DAQ Systems
Number of inputs	4
Input	CAN
Output	CAN bus
Interface	Firewire, TCP/IP
Accuracy class	n/a
Degree of protection	IP20
Sample rate	250 kHz
Housing	Standalone
Real-time capabilities	None

Product Code	Description
1-BPX001	QuantumX backplane wall mounting
1-CASECLIP	QuantumX mounting set
1-BPX003	QuantumX backplane (5)
1-BPX002	QuantumX backplane rack mounting
1-KAB239-2	Cable Ethernet Cat6A, RJ45, 2 m
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-CASEFIT	QuantumX mounting plate
1-KAB271-3	DC power supply cable (ODU-3m-open)
1-NTX001	Adapter power supply, 24 V/DC
1-KAB272-2	FireWire (ODU-2m-ODU)